耐電痕指數測定儀-按鍵式
編號：GD
規格：NLD-B
試驗電壓：0-600V
耐電痕化指數測定儀
NLD-B-按鍵式
產品名稱：耐電痕化指數測定儀
設備型號：NLD-B
滿足標準：
漏電起痕試驗（電痕化指數試驗）是 IEC60112 、IEC60335、 IEC884-1、GB2099.1、UL 746A、GB/T4207、GB4706.1 AS 3638-92等標準規定的模擬試驗項目。
產品概述：
漏電起痕試驗（電痕化指數試驗）是在固體緣材料表面上，在規定尺寸 (2mm×5mm) 的鉑電之間，施加某一電壓并定時 (30s) 定高度 (35mm) 滴下規定液滴體積的導電液體 (0.1%NH 4 CL) ，用以評價固體緣材料表面在電場和潮濕或污染介質聯合作用下的耐漏電性能，測定其相比電痕化指數 (1) 和耐電痕化指數 (PT1) 。 漏電起痕試驗儀（電痕化指數試驗儀）儀適用于照明設備、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、電工儀表、信息技術設備的研究、生產和質檢部門，也適用于緣材料、工程塑料、電氣連接件、輔件行業。
技術參數：
1、 電材料：電頭 — 鉑金屬（白金）
2、 電壓力：1.0±0.05N
3、 電距離：4.0mm ±0.01mm，夾角 60°±5
4、 電電壓：100-600V（48~60HZ）可調，短路電流在1.0±0.1A時電壓下降小于10%
5、 滴液高度：為30~40mm可調
6、 滴液大小：44-55滴/1cm3 可調
7、 滴液時間：30s±5s，
8、 滴液次數：0~9999次可調
9、 漏電判斷：回路電流大于0.5A并維持2秒鐘則繼電器動作切斷電流，指示樣品不合格
10、試驗過程：試驗程序自動控制，抽風
11、參照標準：IEC60112 、 GB/T4207、GB4706.1
12、工作室體積：0.75m3（可根據不同標準定做0.5 m3 或 0.75m3）
13、設備外尺寸：630mm寬×390mm深×750mm高
Proof tracking index tester
NLD-B-push-button
Produ Name: Proof tracking index tester
Equipment Te: NLD-B
Meet the standard:
Tracking test (tracking index test) is IEC60112, IEC60335, IEC884-1, GB2099.1, UL 746A, GB/T4207, GB4706.1 AS 3638-92 and other standards for simulation and pilot projes.
Produ Overview:
Tracking test (tracking index test) is on the surface of the solid insulating material, the required size (2mm × 5mm) between platinum elerodes, a voltage is applied and the time (30s) given height (35mm) provides fluid ping Drop volume of conduive liquids (0.1% NH 4 CL), to evaluate the solid insulating material surface wet or contaminated in the field and under the combined effes of media leakage resistance performance, measured comparative tracking index (1) and resistance to tracking index of (PT1). Tracking tester (tracking index tester) apparatus for lighting equipment, low-voltage elerical appliances, household appliances, elerical machines, motors, power tools, eleronic equipment, elerical instruments, information technology equipment, research, produion and quality control departments , but also for insulation, plastic, elerical conneors, accessories and parts industry.
Technical parameters:
1, the elerode material: the elerode tip - platinum (Platinum)
2, the elerode pressure: 1.0 ± 0.05N
3, the elerode distance: 4.0mm ± 0.01mm, angle of 60 ° ± 5
4, the elerode voltage :100-600V (48 ~ 60HZ) adjustable, short-circuit current in the 1.0 ± 0.1A voltage drop is less than 10%
5, dropping height: 30 ~ 40mm is adjustable
6, dropping size :44-55 drops / 1cm3 adjustable
7, dropping time: 30s ± 5s,
8, : 0 ~ 9999 times adjustable
9, leakage judge: loop current is greater than 0.5A and maintained for 2 seconds then relay cut off the current, indicating samples failed
10, the testing process: Test program automatic control, independent ventilation
11, the reference standard: IEC60112, GB/T4207, GB4706.1
12, the studio volume: 0.75m3 (can be customized according to different standards 0.5 m3 or 0.75m3)
13, the device outside dimensions
