XGW微機控制環剛度試驗機

XGW微機控制環剛度試驗機

一產品介紹：

XGW系列微機控制環剛度試驗機采用機械加荷、電子測量、數字連續調速，應用微型單片機進行實時控制。廣泛應用于具有環形橫截面的熱塑性塑料管材和玻璃鋼管環剛度的測定,滿足PE雙臂波紋管、纏繞管和各種管材標準的要求。該機對試驗力、位移、速度同時進行數字顯示，并有試驗力峰值保持功能。適用于塑料管材環柔、環剛度、扁平、焊縫拉伸、管材蠕變比率等試驗。并具備電子試驗機的功能，可以作拉伸、壓縮、彎曲等試驗。是工礦企業、科研院所、大專院校、商檢仲裁、技術監督等部門的理想檢測設備。

二 特點：

1、 閉環控制：采用松下電機和伺服系統，的調速系統使試驗速度實現閉環、自動控制；

2、軟件系統：采用WindowsXP中文平臺下的人機對話操作，操作簡單，數據準確；開放式軟件，可以根據客戶的個性化要求，出具不同的實驗和參數。

3、 實驗數據和曲線可以存儲、分析、打印和調閱：通過計算機，自動求取試驗力、斷裂強度、屈服強度、拉強度、彎曲撓度、彈性模量、伸長率等參數，并對試驗結果自動存儲；

4、可繪制多種實驗曲線：力－伸長、應力－時間、力－時間、伸長－時間等各種曲線，并具備曲線局部放大、分析和多個試樣曲線可用不同顏色迭加、對比等功能。

5、 保護功能：具備試樣拉斷、過載、過流、撞車試驗機自動停機等多種保護功能：

6、配內徑測量系統，可以測量光壁管和波紋管內徑的變形量

7 采用PC機和單片機系統兩種控制方式，既可由單片機系統單獨操控，亦可與PC機連接使用，實現強大數據處理，分析，曲線跟蹤，數據庫管理等功能

    8 自動返回點，試驗結束自動停車并返回，實驗效率，（可自主設定）

    9 自動清：主控計算機接到試驗開始指令，測量系統便自動清。

    10 自動換檔：根據負荷大小自動切換到適當量程。以測量數據度。

三 合標準

  GB/T 9647-2015熱塑性塑料管材環剛度的測定

  GB/T 18477-2011埋地排水用硬聚氯乙烯雙壁波紋管材

  GB/T 16800-2008排水用芯層發泡硬聚氯乙烯管材

  GB/T1947 埋地用聚乙烯結構壁管道系統

CJ/T165-2002《高密度聚乙烯纏繞結構壁管材》

JC/T 838-1998 玻璃纖維纏繞增強熱固性樹脂夾砂壓力管

GB/T16491、GB/T5836  ISO9697、ISO 9969、ASTM D 2412等標準的規定

四、主要技術參數：

1 負荷；10kN 20kN 30kN 50kN  100KN

2 壓縮空間：0--1000mm  0--1500mm  0--2000mm   0--3000mm。

3負荷測量等級；1級

4力值顯示分辨率：0.1N

5變形顯示分辨率：0.02mm

6 位移顯示分辨率：0.001mm

7 速度范圍：0.1～500mm/min

8 內徑測量系統測量范圍：10mm--3000mm

9 電源：交流220V±10%  50Hz  1.5kW

10外形尺寸：1400×800×2800mm（長X寬X高）

11整機重量：480Kg

XGW microcomputer control ring stiffness tester

Produ introduion:

XGW series microcomputer control ring stiffness tester adopts mechanical loading, eleronic measurement and dial continuous speed control, and the microchip microcontroller is used for real-time control.

It is widely used in the determination of the ring stiffness of thermoplastic tubing and gl tube with circular cross seion, which meets the requirements of PE arms bellows, winding pipe and various pipe material standards.

The test force, displacement and speed of the machine are displayed simultaneously, and the test force peak retention funion.

It is applicable to the test of plastic pipe ring, ring stiffness, flat, weld tensile and tube ratio.

It has all the funions of eleronic universal testing machine, such as stretching, compression and bending.

It is an ideal testing equipment for industrial and mining enterprises, scientific research institutes, colleges and universities, commodity inspeion and arbitration, technical vision and other departments.

Two features:

1. Closed loop control: adopt the panasonic motor and servo system, the high performance speed regulating system enables the test speed to be closed and automatic control;

2. Software system: using the man-machine dialogue operation of Windows xp Chinese platform, the operation is simple and the data is accurate;

Open software can provide different experimental reports and parameters according to customer's personalized requirements.

3, the experimental data and curves can be stored, yzed, print, and read: through computer, automatically calculate the maximum test force, tensile strength, yield strength, tensile strength, bending defleion, parameters such as elastic modulus, elongation, and the test results automatically stored;

4, a variety of experimental curve can be drawn: force - elongation, elongation, stress and time, force - time - time and curve and curve local amplification, ysis and multiple sample curve position can use different color, contrast, and other funions.

5. The safety proteion funion is complete: it is equipped with various proteive funions such as sample pull, overload, overcurrent, automatic shutdown of crash test machine, etc. :

6. The inner diameter measurement system can accurately measure the deformation of the inner diameter of the tube and bellows

7 by using PC and single chip microcomputer system two kinds of control mode, as well as system by single-chip microcomputer control alone, can also be conneed to the PC using, realize the powerful data processing, ysis, curve tracking, database management, and other funions

8 automatic return zero, test end automatic s and return, improve experimental efficiency, (self-setting)

Automatic clear zero: the main control computer receives the test to start the instruion, the measurement system automatically zero.

Automatic shift: automatically switch to the appropriate range according to the load size.

To ensure the accuracy of measurement data.

Three standard

GB/T 9647-2015 determination of the ring stiffness of thermoplastic tubing

GB/T buried drainage with hard polyvinyl chloride double wall corrugated pipe

GB/T 16800-2008 drainage core layer foamed hard polyvinyl chloride tubing

GB/T1947 embedded polyethylene wall pipe system

CJ/t165-2002 "high density polyethylene wrapped wall pipe"

JC/T 838-1998 fibergl winding enhanced thermosetting resin sand pressure tube

GB/T16491, GB/T5836 ISO9697, ISO 9969, ASTM D 2412, etc

Iv. Main technical parameters:

1 maximum load;

10kN 20kN 30kN 50kN 100KN

2. Effeive compression space: 0--1000mm 0--1500mm 0--2000mm 0-- 3000mm.

3. Level of load measurement accuracy;

Level 1

4 force value display resolution: 0.1N

5. Deformation display resolution: 0.02mm

6 displacement display resolution: 0.001mm

7 speed range: 0.1 ~ 500mm/min

Measuring range of internal diameter measurement system: 10mm--3000mm

9 power supply: ac 220V plus or minus 10% 50Hz 1.5kw

10 dimensions: 1400 X 800 * 2800mm (long X width X height)

Total weight: 480Kg