SPECIFICATIONS:

Structural Function Introduction:  1-Switching   2-Camera   3-Video   4-Play   5-RET   6-VGA-HD Change-Over Switch   7-U Interface   8-TF Card Slot   9- Operation Indicator    10- Charge Indicator    11- Microphone   12- Display   13- Gl  14-Support  15-Upper support slot   16- Photosensing device  17-Infrared Light for Night Vision   18- Lens   19- Speaker   20-Lower Support Slot     Operating Instruction1-Insert the TF card into the TF card slot on the left, start it by prsing the Switching. The operation indicator will be ON when the product is started up and a “Welcome” will appear. Wait for 3s until the product is ready. The TF card will be read when the product is under a standby state. The higher the capacity of the card is, the longer the reading time needs (3-5s);  2-Prs the Video to start the video function under the standby state, every video clip lasts 2min. An unlimited loop recording is allowed. Reprs the Video to perform an automatic storage of clips and go back to the standby state; 2 video t (2min) are provided and the pixels of which are 1280X720 and 720X480 rpectively;  3- Pictur can be taken by prsing the Camera (1 picture / prs) under the standby state; 4- VGA-HD Change-Over Switch-For video: VGA=720X480, HD=1280X720; For U mode: the product, when sped, can be connected to the U of your computer. VGA= U flash disk memory, HD=PC CAM (network camera); 5-The RET can be used to rtart the product if a crash is caused by an abnormal operation or running environment. 6- Prs the Play for 3s to start the Play Mode, the fil can be played and paused by short prsing the Play under the Play Mode; The Camera and Video mean Last and Next rpectively. Quit the Play Mode by prsing the Play for 3s to return to the standby state; 7- A low battery signal will appear on the screen when the product is under low battery, charge the product as soon as possible; 8-The Video function will be started if the red light is ON under the charging mode, prs Video to pause and keep the charging mode. If a prolonged video record is needed, no any other operation is allowed under the charging mode.

Key Featur:

5,000,000 CMOS Viewing angle of lens   Wide-angle 150° Turning angle of lens   270° back and forth Rolution of video   VGA-720x480, HD-1280x720 Format of video   I Frame number of video   30fps Format of picture   JPEG Pixel of picture   2560x1920 Night vision   Y Battery capacity   1800MA Screen   2.0TFT high rolution Time required for continuous video record   Approx. 4h Power consumption   250-300MA Recording scope   40m2 Te of memory card   TF card Capacity of memory card   512M-32GB Charging current   400MA Charging time   5h