在金相實驗室，金相試樣的制備過程中，試樣的預磨、拋光研磨是多道不可少的程序，本機YMPZ-2的集污盤和罩采用PPC材料一體成形，是具有外形新穎美觀的新產品。本機是采用單片機控制的金相試樣磨拋機，磨盤100RPM-1400RPM無級調速，數碼管顯示磨盤轉速，電機為直流無刷電機，電機無需更換電刷，使用時間長，機臺烤漆性, 牢固的大型支撐底盤設計了精密的回轉平衡度，強大的電機扭力帶來強大的動力, 帶來的研磨拋光體驗，主軸漏設計, 了幾乎不會損壞的軸承, 的設計帶來良好的使用體驗，全系列支持快速換盤系統, 使用彈性佳,搭配自動研磨裝置,能代替手工進行磨拋的各道工序，可定時，設定磨頭轉速。可試樣的磨拋質量和制作效率。是比較理想的金相制樣設備。本機可適應各種材料的試樣制備。該機的拋盤直徑大于國內同類產品。拋盤的轉速操作，噪音低,操作方便,外形美觀，使用，是金相試樣制備設備。
In the process ofpreparation of metallographic sample, pre grinding, polishing and grinding arethe indispensable procedures. This machine YMPZ-2 is produced with PPC agecollection plate and cover and is the latest product with a new and beautifulappearance. This machine is controlled by single chip microcomputer, grindingdisc 100RPM-1400RPM of stepless speed regulation with dial tube display. Themotor is DC brushless motor and don’t need to replace the brush, used for along time. The machine is non-toxic painted. Strong large support chisdesign ensures the precision rotary balance. Powerful motor brings strong powerand efficient grinding and polishing experience. Spindle leak-proof designensures the bearing almost without damage and the mute design brings agood experience. It supports for fast disk system, with the use of elasticity,and can be used with automatic grinding device. It can replace the manual grindingand polishing of the procedure, timing and set the speed of grinding head. Itcan increase the grinding quality and production efficiency and is the idealmetallographic sample preparation equipment. This machine can be adapted tovarious materials preparation of test samples. The polishing disc diameter islarger than the domestic similar products. The platen speed of polishing discoperates independently. It is the equipment of metallographic samplepreparation.
主要參數Main parameters：
磨拋盤直徑Diameter of the polishing and grinding disc：
砂紙直徑Diameter of the abrasivepaper：
轉速Rotational speed：無調速stepless，100～1400r/min
或四檔速four speed 300r/min, 600r/min, 900r/min, 1400r/min
電動機Motor：直流無刷電機DC brushless motor， 220v，400w
磨頭轉速Rotational speed of grinding head：無調速stepless，20～120r/min
氣缸壓力Cylinder pressure：可調adjustable（建議Suggest 0.2-0.3mpa）
磨頭電動機Motor of grinding head：直流無刷減速電機DC brushless deceleration motor， 220v，100w
外形尺寸External dimension：757×623×
凈重Net weight：
